Draper microprocessor controlled battery charger with high-frequency charge suitable for 50Ah-100Ah lead acid, Gel, AGM and MF batteries. Fitted with an LCD display screen, overheat protection, short circuit protection, over current and overcharging protection capabilities.
The "winter mode" enables the battery charger to powerfully give the battery a quick boost. Each battery charger is attached with insulated copper leads, insulated battery clips, 1.5M power cable and BS approved 3 pin...
<p>A portable battery charger that’s suitable for 10Ah – 85Ah lead-acid batteries. Fitted with overheat, over current, overcharging and polarity protection capabilities. Each battery charger is attached with insulated copper leads, insulated battery clips, 1.5M power cable and non-rewireable 3 pin plug. </p>
<h3>Specifications</h3>
<ul>
<li>Colour: Blue and Black</li>
<li>Guarantee: 1 year</li>
<li>Charging output: 6...
The Draper 6/12V 5.6A Battery Charger is for workshop and home use and suitable for conventional lead acid batteries up to 55Ah. It comes with Integral carrying handle, insulated copper leads and battery clips.
Specifications
Charging output 6/12V
Input-single phase 230V AC
Rated input 130W
Charging current effective 5.6A
Charging current (average) 5.6A
Dimensions 230 x 175 x 140mm
Weight 3kg
<p>The Draper 20V D20 Fast Battery Charger is a fast-working Lithium Charger ideally used with Draper's D20 range. For those times when you need a speedy charge, this lightweight charger features an amperage of 4.0A, and takes just 30 minutes to charge a 2Ah D20 Battery, 50 minutes to charge a 3Ah D20 Battery, 60 minutes to charge a 4Ah D20 Battery, and 75 minutes to charge a 5Ah D20 Battery. This battery charger features charge indicator lights, and is also supplied with 1.8m of cable.<...
The Draper 12/24V 11A Battery Charger is ideal for workshop and home use. Suitable for conventional lead acid batteries up to 200Ah. Integral carrying handle, insulated copper leads and battery clips. Convenient front cable storage.
Specifications
Colour: Black & Blue
Guarantee: 1 year
Charging output 12/24V
Input-single phase: 230V AC
Charging current effective: 13A (RMS)
Charging current (average): 11A (EN60335)
Dimensions&colo...
<p> Draper microprocessor controlled battery charger is suitable for lead-acid, Gel, AGM and MF batteries. Fitted with a large easy to read LCD screen and a mode selection control panel, polarity protection, on board power cord storage, clamp holder and 2 x USB ports. The rugged housing helps protect the internal microprocessor and is fitted with heavy – duty carry handles.</p>
<h3>Specifications</h3>
<ul>
<li>Colour: Blue and Black</li>
<li...
The Draper 12/24V 10.3A Battery Charger is for workshop and home use and suitable for conventional lead acid batteries up to 50Ah (24V) or 100Ah (12V). It comes with an Integral carrying handle, insulated copper leads and battery clips.
Specifications
Charging output 12/24V
Rated input 180W
Charging current effective 12V 9.8A & 24V 5.3A
Charging current (average) 12V 8A & 24V 7.8A
Dimensions 258 x 145 x 250mm
Weight 5kg
<p>Charge your car battery with this easy to use microprocessor controlled 12V battery charger. Mode selection control panel with charge button and ability to select the charge rate: 1A, 3A, 5A, and 10A. There is an LCD screen with easy to read icons. Rugged design fitted with on-board cord storage and clamp holder. There are also two USB ports for charging mobile devices.</p>
<h3>Features and Benefits</h3>
<ul>
<li><strong>Durable</strong> &nd...
The Draper XP20V Fast Charger is part of the XP20 series with a 1.8m cable. Suitable for 2.0Ah, 4.0Ah and 6.0Ah XP20 batteries. XP20 interchangeable battery system allows you to combine one battery with any of the tools within the XP20 series.
Specifications
Guarantee: 1 year
Suitable for 2.0Ah, 4.0Ah and 6.0Ah XP20 batteries
Cable length: 1.8m
For workshop and home use. Fully automatic with high frequency technology, continuous adjustment for unsupervised charging and microprocessor controlled. Maintains battery in a 100% fully charged state. Features include polarity inversion protection and thermal overload protection. Suitable for wet, AGM and gel batteries between 40Ah and 160Ah. Microprocessor controlled, supplied with insulated copper leads and battery clips.
Specifications
Charging output: 6/12V
Charging current effective: 8A ...
<p>Charge your dead batteries so you don’t need to buy a new again! For workshop and home use. Suitable for conventional lead acid batteries. Well–designed convenient machine with cable storage and fitted with an integral carry handle. Supplied with insulated copper leads and battery clips.</p>
<h3>Features and Benefits</h3>
<ul>
<li><strong>Safe</strong> – Thanks to its insulated copper leads and battery clips, there&...
<p>Charge your dead batteries so you don’t need to buy a new again! For workshop and home use. Suitable for conventional lead acid batteries. Well–designed convenient machine with cable storage and fitted with an integral carry handle. Supplied with insulated copper leads and battery clips.</p>
<h3>Features and Benefits</h3>
<ul>
<li><strong>Safe</strong> – Thanks to its insulated copper leads and battery clips, there&...
<p>Charge your dead batteries so you don’t need to buy a new again! For workshop and home use. Suitable for conventional lead acid batteries. Well–designed convenient machine with cable storage and fitted with an integral carry handle. Supplied with insulated copper leads and battery clips.</p>
<h3>Features and Benefits</h3>
<ul>
<li><strong>Safe</strong> – Thanks to its insulated copper leads and battery clips, there&...
<p>Charge your dead batteries so you don’t need to buy a new again! For workshop and home use. Suitable for conventional lead acid batteries. Well–designed convenient machine with cable storage and fitted with an integral carry handle. Supplied with insulated copper leads and battery clips.</p>
<h3>Features and Benefits</h3>
<ul>
<li><strong>Safe</strong> – Thanks to its insulated copper leads and battery clips, there&...
For workshop and home use. Suitable for conventional lead acid batteries up to 45Ah. Integral carrying handle, insulated copper leads and battery clips.
Specifications
Charging output: 6V/12V
Rated input: 100W
Rated charging current at 6V 4.2A
Rated charging current at 12V 4.2A
Dimensions: 240 x 210 x 140mm
Weight :2.5kg
Colour: Blue
For workshop and home use. Suitable for conventional lead acid batteries up to 85Ah. Integral carrying handle, insulated copper leads and battery clips.
Specifications
Charging output 6/12V
Rated input 210W
Rated charging current at 6V 8.4A
Rated charging current at 12V 8.4A
Dimensions 258 x 145 x 250mm
Weight 4.2kg
Colour: Blue
Draper 6V/12V Smart Charger And Battery Maintainer (10A) - Blue & Black
Description:
<p>This portable Draper 10A smart charger does more than just charge 6V and 12V vehicle batteries. It has the ability to activate, analyse and recondition the battery in 10-steps, making it ideal for deep discharged batteries.<p>
<p>The charger can be connected to a Lead-Acid or Lithium battery for a long duration without the risk of overcharging. It can also be used in winter temperatures as low as -20°C. It’s easy to use and a cost-effective solution to keep...
Draper D20 20V Nailer/Stapler with 2Ah Battery and Charger
Description:
<p>Ideal for upholstery and furnishing applications and also suitable for repairing fence panels or installing hardboard. The Draper D20 20V Nailer Stapler is a powerful and efficient nailer with a firing rate of 60 nails per minute and can be used for single or contact firing. This nailer takes Type 90 staples between 19mm and 40mm, and 18-gauge nails between 20 and 50mm in length. Quick and easy to load, it has a magazine capacity of 100. This practical and lightweight nailer fe...
<p>Easy–to–use microprocessor-controlled 12V battery charger that delivers a fully automatic smart charge with its 70 Amp engine start function. Mode selection control panel with charge button and ability to select the charge rate: 2A, 5A, 10A, 20A and 30A. There is an LCD screen with easy to read icons. Rugged design fitted with on-board cord storage and clamp holder. There is also a LED worklight and two USB ports for charging mobile devices. Battery reconditioning (d...
For garage and workshop use. Featuring trolley wheels for easy movement around the workshop or yard. The starter/charger has thermal overload protection, battery timer, easy-to-read ammeter, polarity inversion and transport handle. Insulated copper leads.
Specifications
Colour: Black & Blue
Guarantee: 1 year
Charging output 12/24V
Input-single phase: 230V - 16A
Charging current effective: 75A (RMS)
Charging current (average): 50A (EN...
<p>The Draper 12/24V 120A Battery Starter/Charger is ideal for workshop and home use. Suitable for conventional lead acid batteries up to 400Ah. Integral carrying handle, insulated copper leads and battery clips. Convenient front cable storage.</p>
<H3>Specifications</H3>
<ul>
<li>Colour: Black & Blue</li>
<li>Guarantee: 1 year</li>
<li>Charging output 12/24V</li>
<li>Input...
Draper 230V 1 Hour Charger for 18V 2Ah Li-Ion Battery Pack is suitable for the cordless grass trimmers and leaf blowers in the Draper 18V range.
Specifications
Mains powered charger: 230V
Charging time: 1 hr
Suitable with Draper Battery 80628
18V 2Ah Li-Ion Battery sold separately
Dimensions: D 6.5 x W 7.2 x H 11.2 cm
Colour: Black
Draper 20A 12V Charger / 50A Stater - Blue & Black
Description:
<p>Draper microprocessor controlled battery charger with battery recondition/desulphation mode is suitable for use on lead-acid, Gel, AGM and MF batteries. </p>
<p>Fitted with a large easy to read LCD screen and a mode selection control panel, polarity protection, on board power cord storage, clamp holder and 2 x USB ports. The rugged housing helps protect the internal microprocessor and is fitted with heavy – duty carry handles.</p>
<h3>Specificat...
Draper D20 20V Brushless 1/2" Mid-Torque Impact Wrench (400Nm) with 2x 3Ah Batteries And Charger
Description:
<p>Draper D20 20V Brushless 1/2" Mid-Torque Impact Wrench is part of the D20 series. It features a brushless motor, 5 torque pre-sets – 100N, 150N, 200N, 300N, 400N, – super bright LED work light that is useful when working on the underneath of cars in low light conditions. Fitted with a belt clip and supplied with 2 x 3.0Ah batteries, charger.</p>
<p>All Draper tools are manufactured to high quality standards that are strictly controlled by ...