Draper Combination Tap And Die Set - Metric And BSP In EVA Foam Insert Tray (22 Piece)
Description:
Expert Quality, manufactured from carbon steel. Taps and dies suitable for cleaning and cutting threads on mild steel and aluminium. Supplied complete in a two tone 1/4 drawer EVA insert tray made from closed cell foam, suitable to be used in Draper and Draper Expert tool chests and other manufacturers similar tool chests.
Specifications
Dimensions: 138 x 270 x 40mm
7 metric dies size: 3 x 0.5, 4 x 0.7, 5 x 0.8, 6 x 1.0, 8 x 1.25, 10 x 1.5 and 12 x 1.75 - 1" O/D
2 BSP dies size: 1/8" and 1...
Draper Petrol Generator with Wheels (2.5kVA/2.5kW)
Description:
The Draper Petrol Generator with wheels is powered by 7HP Petrol Engine. Expert Quality, Powered by 7HP petrol engine, Recoil start, Steel tubular frame with polyester coated finish, Oil and fuel resistant anti - vibration mounts, Dual voltage output 110/230V, 12V DC output, Supplied with spark plug wrench, screwdriver and 12V charging lead and bag on pallet.
Specification
Rated power: 2500W
Run time: 11 hours at 75% load
Output: 110/230V and 12V DC
Engine: 7HP ...
The Draper Petrol Generator is built with a single-cylinder with a 4 stroke engine that allows the maximum output of 7.0kW. Weighing only 38kg with a steel frame to help with easy movability around any job or workplace. Fitted with an easy recoil start system for an easy start.
With a tank size of 3.6litres that runs for approximately 4 hours on a single tank of unleaded fuel, this outstanding petrol generator is supplied with spark plug wrench, screwdriver and 12V charging lead and bag on palle...
This set includes a 1/4" hex impact magnetic bit holder, a selection of commonly used screwdriver bits and other useful accessories. The bit holder is made from chrome vanadium steel and stainless steel, which is correctly hardened and tempered for strength and durability. The screwdriver bits are made from S2 steel and have a shock absorbing torsion design for increased torque performance. Each has a blackened hex shank with a shot blast finish and precision ground t...
Draper Petrol Generator with Wheels (6.5kVA/6.0kW)
Description:
Expert Quality, Powered by 15HP petrol engine, recoil start, and steel tubular frame with polyester coated finish. Oil and fuel resistant anti - vibration mounts, dual voltage output 110/230V, 12V DC output. Supplied with spark plug wrench screwdriver and 12V charging lead and bag on pallet.
Specification
Rated power: 6000W
Run time: 8 hours at 75% load
Output: 110/220V and 12V DC
Engine: 15HP petrol
Start: recoil and electric
Sockets: 2 x 16A - 1...
Draper D20 20V Brushless Random Orbit Polisher 125mm
Description:
Part of the D20 multi-tool battery system. This cordless random orbit polisher is equipped with a high performance brushless motor. There is a choice of six speeds to suit application. The motor enables a smooth start and there is a focus on safety features including anti-restart and overload protection. The slide on/off switch with lock-on function allows continuous operation whilst the side handle is held. There is an ergonomic soft grip handle as well as ea...
This set includes a 1/4" hex impact magnetic bit holder and a selection of commonly used screwdriver bits. The bit holder is made from chrome vanadium steel and stainless steel, which is correctly hardened and tempered for strength and durability. The screwdriver bits are made from S2 steel and have a shock absorbing torsion design for increased torque performance. Each has a blackened hex shank with a shot blast finish and precision ground tips to prevent cam out and scr...
Draper Expert Impact Screwdriver Bit Set (31 Piece)
Description:
This expert quality screwdriver bit set is designed for use on cordless impact wrenches
Features:
Shock absorbing design for increased torque performance
Enhanced machines tip for superior engagement with screw heads, to prevent wear and screw damage
Manufactured from S2 steel correctly hardened and tempered to 52-58HRC
Supplied inside a sturdy plastic case with carry handle
Specifications:
Dimensions: H:12.5 x W:9.0 x D:9.0 cm
Colour: Green
Guarantee:...
Features:
0-45 degree tilting table
No-volt switch
Sanding belt, sleeves, drums, wrench and throat plates included
38mm dust extraction facility
Specifications:
Dimensions: H:53.0 x W:45.5 x D:45.5 cm
Colour: Blue And Black
Guarantee:2 years
Material: Metal
Model Number: 98425
This 80A Plasma Cutting Torch has a 4m-long 8mm cable and is suitable for plasma cutting up to 80A. It has a Euro-style connector and is supplied with an electrode, ceramic shroud and nozzle (already installed on the torch), cutting guide and a tip removal wrench.
Features:
Euro-style connector
A 4m-long 8mm cable
Suitable for plasma cutting up to 80A
Supplied with an electrode, ceramic shroud and nozzle (already installed on the torch), cu...
The Draper 141cc Petrol Cultivator/Tiller is a versatile tool is ideal for preparing the ground in gardens, smallholdings and allotments.
Featuring four robust blades with a working width of 360mm, this tiller is effective for use in all soil types and makes short work of cutting through hard soil, roots and sod.
With an adjustable tilling depth of up to 260mm, easy-to-use handlebar steering, and a variable speed four-stroke petrol motor, you'll be able to complete projects easily and preci...
The Draper 161cc Petrol Cultivator/Tiller is a versatile tool is ideal for preparing the ground in gardens, smallholdings and allotments.
Featuring four robust blades with a working width of 360mm, this tiller is effective for use in all soil types and makes short work of cutting through hard soil, roots and sod.
With an adjustable tilling depth of up to 260mm, easy-to-use handlebar steering, and a variable speed four-stroke petrol motor, you'll be able to complete projects easily and preci...