Lumberjack 12" Floorstanding Professional Bandsaw With Induction Motor
Lumberjack 12" Floorstanding Professional Bandsaw With Induction Motor
Product code
341162
Model
BS305
£543.99
In Stock
Online Exclusive
- Overview
- Reviews
- Delivery
- Returns
Overview
A floorstanding woodworking bandsaw with a cutting capacity of 150mm (61/2"), big enough for most workshops. The power is delivered by a quiet induction motor with a belt drive to the bandsaw wheel. A two speed pulley allows the correct blade speed to be selected, depending on the hardness of the material being cut. The Lumberjack BS305 has three bearings on the blade guard. The two sealed bearings mounted side-on to the blade, control blade twist and keep it true. The rear bearing takes the thrust of the back of the blade allowing it to run freely. The same setup is then repeated beneath the table.
Features:
- The cast iron table tilts from 90 degrees to 45 degrees, on a rack & pinion, and has a positive stop at both of those positions. Any angle in between can be read off the scale and locked in. For rip cuts the guide fence can be situated on either side of the blade, can be locked into position with a single press of the lever and has a clear marker to set against the metric scale. The fence itself can be fitted in two ways. When cutting thicker material the full face height of 60mm is used. When cutting thin and narrow strips the fence is fitted with the small face, against the blade to allow clearance around the guides. The bandsaw is fitted with an LED work light on a flexible stem, so that the work area will always be well lit
- The two doors are fitted with safety locks which cut power to the motor when the doors are open for blade changing or cleaning
- Tensioning the blade correctly is made simple thanks to the features on this premium model. A blade tension lever quickly sets the tension. After a blade change fine tuning can be carried out with the aid of a tension indicator and scale. The required tension varies according to blade width. A window in the top door allows the operator to confirm blade tension is correct and make an adjustment when necessary
- A dust extractor is always recommended when using a bandsaw. The dust collection outlet has 3 rings which allow it to accept 3 sizes of hose, 50mm, 75mm & 100mm diameter making it compatible with any type of extraction system. If extraction is not being used however, the bandsaw is fitted with an integral dust collection draw. Dust falling into the base of the machine will be collected here, allowing it to be quickly and easily emptied
Specifications:
- Dimensions: H:157.0 x W:53.0 x D:70.0 cm
- Colour: Red
- Guarantee:1 year
- Material: Metal
- Model Number: BS305
- Self Assembly Required: Yes
Reviews
Delivery
Vendor Direct Products:
This product is delivered by our approved supplier on a Standard Delivery Service.
Standard delivery to most of UK Mainland is FREE on orders over £30 from Robert Dyas, use code FREEDEL30 at checkout and is available on Standard products. This offer excludes products for delivery to Scottish Highlands, Scottish Isles, Isle of Man, Isles of Scilly and Isle of Wight.
Scottish Highlands & Islands postcodes: AB, FK, HS, IV, KA, KW, PA, PH, ZE, LL58-LL78, IM, TR, PO30-41
Please note some larger products are delivered to kerb-side (the street outside your home), it is at the drivers discretion if they can deliver the item to another location on the property.
Please be aware that we currently cannot arrange for delivery of this product to the following postcodes: AB, FK, HS, IV, KA, KW, PA, PH, ZE, LL58-LL78, IM, TR, BT, PO30-41.
Whilst we do all that we can to prevent this, from time to time, orders can experience slight delays in courier networks. Due to this, we would strongly advise against pre-booking/making payment for third party trades to build/install your item until you are in receipt of and have inspected the goods. Robert Dyas is unable to compensate for any loss of funds to third party organisations.
Returns
Returns
In the UK you have a legal right, under the Consumer Contracts Regulations June 2014, to cancel your order within fourteen (14) days following your receipt of the goods. Refunds for orders cancelled under the provisions of the Consumer Contracts Regulations will be processed in accordance with your legal rights.
You may not cancel orders for the following types of products:
- Electrical/Technical products which have been unsealed
- Customised or bespoke Products
- Anything of a nature that for hygiene or associated health and safety - this includes the Outdoor Spas, Mattresses and Divan Sets
- Fresh food
- Perishable items including live plants and Trees
Under the Consumer Contracts Regulations June 2014 you have a duty to take reasonable care of Products whilst they are in your possession. You will receive a full refund of the purchase price of the Products.
This is not intended to be a full statement of your rights under the Consumer Contracts Regulations. Full details of your rights are available from your Local Authority’s Trading Standards Office.
How To Return A Product
If you wish to return your item to Robert Dyas, you can do so by the following method:
1. Request a Collection via Robert Dyas Customer Services
Contact our Customer Services team who will be able to arrange a collection for your item with the supplier. Please ensure that you provide your order number when contacting customer services.
If you are not at home when we try to collect we reserve the right to deduct from your refund or charge your credit card the direct costs to us of the failed return in accordance with the Consumer Protection (Distance Selling) Regulations 2000.
